Demilec Home Energy Audit in Milpitas: What to Know First
We provide independent Demilec home energy audit in Milpitas, typically scheduling within 48 hours and completing the full diagnostic same-day. Most audits run $280-$520 depending on home size and whether duct leakage testing is included, and we put the exact price in writing before we start. This page is for Demilec owners in Milpitas neighborhoods like the Great Mall corridor, North Milpitas, and the newer builds near McCarthy Ranch who need to know why their spray foam or open-cell insulation isn’t performing as expected. Call (650) 770-8707 to schedule or text us a photo of your issue.
How Demilec Products Fail - and How We Fix Them
- Demilec SEALECTION 500 open-cell foam shrinkage in attics. In Milpitas, the temperature swing between 45°F winter nights and 95°F summer days causes SEALECTION 500 to contract away from rafter bays, creating thermal bypasses. We find this with thermal imaging, then cut back the failed foam and reapply with proper substrate conditioning so the new bond holds.
- Demilec Heatlok HFO High Lift overspray in tight crawl spaces. The HFO blowing agent expands aggressively; installers sometimes miss depth targets in Milpitas crawl spaces with limited headroom, leaving homeowners with R-value that looks right on paper but performs poorly due to compression. We probe with a depth gauge, remove the oversprayed sections, and reinstall to manufacturer spec.
- Demilec Heatlok XT closed-cell delamination from OSB roof sheathing. Moisture from the South Bay’s marine layer gets trapped when the foam is applied over damp substrate. We pull the delaminated sections, dry the sheathing with targeted airflow, and reapply only when moisture content reads below 19% on a pin meter.
- Demilec AgriThane agricultural-grade foam mistakenly used in residential applications. We’ve found this in two Milpitas homes near the 880 corridor where a previous contractor used whatever was on the truck. AgriThane lacks the fire-retardant package required for inhabited spaces. We document it, remove it per local disposal requirements, and replace with code-compliant Heatlok XT.
- Demilec SEALECTION AgriBalance off-gassing in conditioned attics. When applied too thick in a single pass, the water-blown chemistry can trap residual odor that cycles through the HVAC. We ventilate the cavity, verify with a VOC meter, and in severe cases remove and reapply in lifts no thicker than 3.5 inches per pass.
Our Demilec Home Energy Audit Process

- 1
Call and schedule. A live person answers. We ask about your Demilec product line, installation year, and symptoms. You get a 2-hour arrival window and a text when the technician is en route.
- 2
Blower-door test and thermal imaging. We pressurize the house and record CFM50 baseline. Then we walk the envelope with a FLIR camera to map where conditioned air is escaping through or around the Demilec foam.
- 3
Insulation inspection and depth verification. We probe every cavity, check for settling or shrinkage, and photograph findings. If the foam is salvageable, we say so. If it’s not, we show you why.
- 4
Duct leakage testing (if included). We seal the registers and pressurize the duct system to measure how much conditioned air is leaking into unconditioned space. In Milpitas, duct leakage often exceeds 20% in homes built before 2010.
- 5
Written scope and price. Before any work starts, you get a flat price, a written scope, and a written warranty. Haven Standard Clause 1. No exceptions.
- 6
Completion documentation. We rerun the blower-door test, hand you the before-and-after numbers, and deliver a Documented Photo Record via email before we leave.
Before
AfterWhat Demilec Home Energy Audit Costs in Milpitas
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Basic home energy audit (blower door + thermal imaging + insulation inspection) | $280-$380 | Home size above 2,500 sq ft; multiple attic hatches; restricted access |
| Audit with duct leakage testing | $420-$520 | Duct system in crawl space vs. attic; number of HVAC zones |
| Demilec-specific foam inspection and remediation planning | $180-$280 (add-on) | Depth of foam removal needed; disposal requirements for off-spec material |
Most Milpitas homes in the 1,400-2,200 sq ft range fall in the middle of these ranges. We also service Reflectix radiant barrier systems if your home has hybrid insulation. Call (650) 770-8707 for a free estimate with exact pricing.
Why Milpitas Homeowners Call Topside Attic Insulation Milpitas for Demilec Work

We’ve audited and repaired Demilec installations in Milpitas since 2016, from the 1960s tracts near Jacklin Road to the newer construction in the Sierra Vista area. Our technicians carry thermal imagers and blower-door rigs, not clipboards and guesswork. The 365-Day Done Right Promise applies to every job, and we publish before-and-after blower-door numbers so you can verify the result yourself. As an independent Demilec service provider, we have no manufacturer quota to hit and no incentive to sell you a product line that doesn’t fit your home. We also work with Reflectix and other brands, so if your best fix is a hybrid approach, we’ll say so plainly. The R-value on the bag means nothing if the air is still moving through the wall - seal first, then insulate.
FAQs
No. Demilec’s product warranty covers material defects regardless of who inspects or repairs the installation, provided the original application met manufacturer guidelines. We document our findings with photos and moisture readings so any material claim you file has supporting evidence. Call (650) 770-8707 if you need help navigating the warranty process.
We typically schedule within 48 hours and complete the audit in 2-3 hours on-site. Same-week appointments are usually available. Call (650) 770-8707 to check today’s openings.
Spot repairs run $800-$1,800 in most Milpitas homes; full removal and replacement of a failed attic application typically runs $3,200-$5,800. We only recommend removal when the foam is delaminated, off-spec, or has failed structurally. If we can cut back and refoam a section, we will show you exactly where and why. Call for a free estimate.
We source Demilec SEALECTION and Heatlok lines through authorized distributors and can match the original product specification. We do not claim exclusive or preferred status with Demilec. If a different material better solves your problem, we will explain why. Call (650) 770-8707 to discuss material options.
You receive a printed blower-door report with before numbers (and after numbers if we perform sealing work), thermal images with annotations, a written scope of any recommended repairs, and a Documented Photo Record delivered by email. Every job. No request needed.
Written by Wes Okafor, Owner, Topside Attic Insulation Milpitas at Topside Attic Insulation Milpitas, serving Milpitas and nearby areas.